After setting the start button, press the gray button to record the green light from the flash and start recording
in the recording click the gray button to stop
the recording stops if you press the third button, the recorder will not start recording next time it will not just continue the record
this is a fool-proof effect to prevent the user accidentally covers the critical files
and use must first download the software to present after the recording in the recorder
before pressing the button next gray recording
correct operation
set "button to start _" -> confirm -> recorder away from the computer -> press the gray button to start recording (green LED lights) -> log -> press the gray button to stop (green LED stops) -> use recorder software downloads archive -> archive / Do not archive -> no need to set the next record by pressing the gray button to start Note: the next time the recording began, the previous record will be completely erased completely found again !!! so make sure that important data has been downloaded correctly and storage
Because of improper operations do cause memory disappears
error Demonstration:
set the button to start -> pulling power -> power on -> press the button to start recording -> pulling power -> power on -> button to stop -> Download
the correct operation:
set the button to start -> pull power -> power -> press button to start recording -> button to stop / stop recording and the like (the green LED stops blinking) -> pull electricity -> power on -> download Ruoyin lead to erroneous operation of the memory items disappear, memory It can not be forced out of
